Lexmark 30G0400 Common Criteria Installation Supplement and Administrator Guid - Page 5
Overview and first steps
UPC - 734646268899
View all Lexmark 30G0400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Overview and first steps Overview This guide describes how to configure a supported LexmarkTM multifunction printer (MFP) to reach Common Criteria Evaluation Assurance Level 3 (EAL 3). It is critical that you carefully follow the instructions in this guide, as failure to do so may result in a device that does not meet the requirements of the evaluation. Using this guide This guide is intended for use by Lexmark service providers, and network administrators responsible for the management of security appliances and software in their network environment. A working knowledge of Lexmark multifunction printers is required for effective use of this guide. Some settings can be configured using either the Embedded Web Server (EWS), or the device touch screen. Where applicable, instructions for both methods are included. For information about physically setting up the MFP or using device features, see the User Guide that came with your MFP. For information about using the MFP touch screen, see"Appendix A: Using the touch screen" on page 45. Supported devices This guide describes how to implement an evaluated configuration on the following models: • Lexmark X463 • Lexmark X464 • Lexmark X466 • Lexmark X651 • Lexmark X652 • Lexmark X654 • Lexmark X656 • Lexmark X658 • Lexmark X734 • Lexmark X736 • Lexmark X738 • Lexmark X860 • Lexmark X862 • Lexmark X864 Operating environment The instructions provided in this guide are based on the following assumptions: • The MFP will be installed in a cooperative, non-hostile environment that is physically secure. • The administration platform and local area network are physically and logically secure. 5