Lexmark 4600 C77x - Setup Guide - Page 13
Installing the scanner, Removing the scanner top, Removing the print cartridge packaging - cartridge error
View all Lexmark 4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Caster base setup Installing the scanner 1 Place the scanner base on the scanner shelf. Align the four pads on the bottom of the scanner with the depressions on the scanner shelf. 2 Insert the two thumbscrews attached to the bottom of the scanner shelf into the bottom of the scanner, and tighten it securely. 3 Align the hinges on the scanner top with the slots in the scanner, and then lower the scanner top onto the scanner. For information on removing the scanner top, see "Removing the scanner top" in the User's Guide located on the 4600 MFP Software and Documentation CD. 4 Connect the two scanner cables. Note: To prevent errors and scanner malfunction, make sure the scanner cable thumbscrews are tightened securely. 5 Go to Removing the print cartridge packaging on page 16, and follow the printer setup instructions. For information on installing the interface card and memory and firmware cards, go to Installing printer memory or option cards on page 19. Installing the scanner 12