Lexmark 460dn Wireless Setup Guide - Page 29
Connecting using an Ethernet network, Wired setup and connection, Install, Agree, Suggested
![]() |
UPC - 734646083652
View all Lexmark 460dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Connecting using an Ethernet network Wired setup and connection 1 Insert the Software and Documentation CD. 2 Click Install. 3 Click Agree. 4 Click Suggested. 5 Click Wired Network Attach. 6 Connect the Ethernet cable to the printer and to an active Ethernet port on the network. Make sure the computer you are using to configure the printer is attached to a working network port on the same network as the printer. 7 Connect the power cord to the printer and plug it into the wall. Turn on the printer. 8 Follow the on screen instructions to complete the wired configuration. Note: For information on telephone and fax setup, refer to the User's Guide on the Software and Documentation CD. Connecting using an Ethernet network 29
![](/manual_guide/products/lexmark-460dn-wireless-setup-guide-d4d32ca/29.png)
Connecting using an Ethernet network
Wired setup and connection
1
Insert the
Software and Documentation
CD.
2
Click
Install
.
3
Click
Agree
.
4
Click
Suggested
.
5
Click
Wired Network Attach
.
6
Connect the Ethernet cable to the printer and to an active Ethernet port on the network.
Make sure the computer you are using to configure the printer is attached to a working network port on the same
network as the printer.
7
Connect the power cord to the printer and plug it into the wall. Turn on the printer.
8
Follow the on screen instructions to complete the wired configuration.
Note:
For information on telephone and fax setup, refer to the
User's Guide
on the
Software and Documentation
CD.
Connecting using an Ethernet network
29