Lexmark 544n User's Guide - Page 225
Admin menu, Settings, Print menu, Quality menu, Toner Darkness, RGB Contrast
UPC - 734646116329
View all Lexmark 544n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
CHECK THE DARKNESS, BRIGHTNESS, AND CONTRAST SETTINGS The Toner Darkness setting is too light, the RGB Brightness setting is too light, or the RGB Contrast setting is too low. 1 From the printer control panel, press . 2 From the Admin menu, press the arrow buttons until Settings appears, and then press . 3 Press the arrow buttons until Print menu appears, and then press . 4 Press the arrow buttons until Quality menu appears, and then press . 5 Press the arrow buttons until Toner Darkness, RGB Brightness, or RGB Contrast appears, and then press . 6 Change the selected setting to a lower value, and then press . THE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY • Load paper from a fresh package. • Store paper in its original wrapper until you use it. CHECK THE PAPER Avoid textured paper with rough finishes. CHECK THE PAPER TYPE SETTING Make sure the Paper Type setting matches the paper loaded in the tray. MAKE SURE COLOR SAVER IS SET TO OFF Color Saver may be set to On. A TONER CARTRIDGE MAY BE LOW When 88 Cartridge Low appears, order a new cartridge. A TONER CARTRIDGE MAY BE DEFECTIVE Replace the toner cartridge. THE IMAGING KIT MAY BE WORN OR DEFECTIVE Replace the imaging kit. Note: The printer has two types of imaging kits: a black and color imaging kit, and a black imaging kit. The black and color imaging kit contains cyan, magenta, yellow, and black. The black imaging kit contains black only. Troubleshooting 225