Lexmark 736de User's Guide - Page 184
Location, Alarms, Timeouts
UPC - 734646146647
View all Lexmark 736de manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Menu item Location Alarms Alarm Control Cartridge Alarm Timeouts Standby Mode Disabled 2-240 Timeouts Power Saver 1-240 Timeouts Screen Timeout 15-300 Timeouts Print Timeout Disabled 1-255 Description Specifies the location of the printer Note: The location will be stored on the Embedded Web Server. Sets an alarm to sound when the printer requires operator intervention Available selections for each alarm type are: Off Single Continuous Notes: • Single is the factory default setting for Alarm Control. Single sounds three quick beeps. • Off is the factory default setting for Cartridge Alarm. Off means no alarm will sound. • Continuous repeats three beeps every 10 seconds. Specifies the number of minutes of inactivity before the system enters a lower power state Note: 15 minutes is the factory default setting. Sets the amount of time the printer waits after a job is printed before it goes into a reduced power state Notes: • 30 minutes is the factory default setting. • Lower settings conserve more energy, but may require longer warm-up times. • Select the lowest setting if the printer shares an electrical circuit with room lighting or you notice lights flickering in the room. • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm-up time. Sets the amount of time in seconds the printer waits before returning the printer display to a Ready state Note: 30 seconds is the factory default setting. Sets the amount of time in seconds the printer waits to receive an end-of-job message before canceling the remainder of the print job Notes: • 90 seconds is the factory default setting. • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting. • Print Timeout is available only when using PCL emulation. This setting has no effect on PostScript emulation print jobs. Understanding printer menus 184