Lexmark 760n User Reference - Page 80
Network Card Busy, No DRAM Installed
UPC - 734646068543
View all Lexmark 760n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Message Load Manual Load Plain Letter Load Staples Load Tray Menus Disabled Network Card Busy Network Network , No DRAM Installed What this message means What you can do A request for a manual feed job has been sent to the printer. The printer is ready for insertion of a single sheet into the manual feed slot. • Load a sheet of the paper specified in the second line of the display in the manual feed tray or multipurpose feeder. • Press Select or Go to ignore the manual feed request and print on paper already installed in one of the input sources. If the printer finds a tray that has paper of the correct type and size, it feeds paper from that tray. If the printer cannot find a tray with the correct paper type and size, it prints on whatever paper is installed in the default input source. • Press Menu to open the Job Menu and cancel the current job. See also: Loading the multipurpose feeder Someone has initiated a tray calibration procedure. Load paper into and press Go to continue the calibration process. The printer is trying to staple a print job, but the stapler is empty. • Install a new staple cartridge in the stapler. • Press Go to clear the message and continue printing without stapling. • Press Menu to open the Job Menu and cancel the current job. The printer is trying to feed paper from a source it detects is empty. • Load paper of the size and type requested in the second line of the display in the specified tray. The printer automatically clears the message and continues printing the job. • Press Menu to open the Job Menu and cancel the current job. See also: Loading the trays The printer menus are disabled. You cannot change the printer settings from the operator panel. You can still open the Job Menu to cancel a job that is printing or to select a confidential job or a held job that you want to print. If you need access to the printer menus, contact your network administrator. See also: Disabling the operator panel menus An internal print server (also called an Wait for the message to clear. internal network adapter or INA) is being reset. A network interface is the active communication link. Wait for the message to clear. A network interface is the active communication link, where represents the active communication link and represents the channel. Wait for the message to clear. No DRAM is installed in the printer. Turn the printer off, install DRAM and turn the printer back on. 80