Lexmark 782dn SCS/TNe Emulation User’s Guide - Page 57
B. Configuring the Print Server
UPC - 734646028349
View all Lexmark 782dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
IMPORTANT: The SCS/TNe Emulation can only receive jobs through a single printer server. Moving the selected print server or inserting a new print server may cause a loss of SCS/TNe print capability. B. Configuring the Print Server To enable SCS printing, several print server settings may need to be changed. You can make these changes from the printer operator panel. 1 Set NPA Mode to Auto. Select Menus > Network/Ports. Select the print server to be used for SCS printing, for example Standard Network, Network 1, or Network 2. Locate NPA Mode and scroll to the Auto setting. Touch Submit to save. This setting will ensure that the printer's LAN connection will detect the Card. 2 Set the Network Job Timeout. This timeout is used by all print servers. Select Menus > Settings > General Settings> Timeouts > Network Job Timeout. Scroll down to 0. Touch Submit to save. Option Network Job Timeout Value Description "0" This is the recommended setting and corresponds to "disabled". Other settings may cause communication problems. A setting of "0" allows the host SNA server, or SCS/TNe emulation timeout values to control when print jobs from another protocol, interface, server, or host can be started. AS/400 and iSeries Installation Setup: Task 2 - Configuring a Print Server 57