Lexmark 782dtn User's Guide - Page 20
Installing an option card
UPC - 734646144247
View all Lexmark 782dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing and removing options Installing an option card Your printer has one expansion card slot that supports a number of option cards. The following table describes their function. Card MarkNet internal print server Parallel 1284-B Interface Card Serial Interface Card Function Adds an Ethernet or Token-Ring port so you can connect your printer to a network Adds a parallel port Adds a serial port Note: The network models ship with an integrated Ethernet print server already installed. Note: You need a small Phillips screwdriver to install these options. 1 Remove the system board access cover. For more information, see Removing the system board access cover. 2 Remove the screw from the metal plate that covers the connector slot, and then lift the plate off. Save the screw. Warning: Option cards are easily damaged by static electricity. Touch something metal on the printer before you touch an option card. 3 Unpack the option card. Save the packing materials. 4 Align the connector on the option card with the connector on the system board. The cable connectors on the side of the option card must fit through the connector slot. 5 Push the option card firmly into the option card connector. Installing memory and option cards 20