Lexmark B2338 Printer Languages and Interfaces Technical Reference - Page 90
LQUERYSEED, PJL LBYPASSPASSWORD, from the Lexmark Customer Support Center.
View all Lexmark B2338 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Printer job language 90 @PJL LBYPASSPASSWORD KEY = key [] 1 Send the LQUERYSEED command to the printer by one of the host computer interfaces. This command displays a value called the seed on the control panel through MarkVision Enterprise. If the printer does not have a control panel, then the seed is printed on the Menu Settings Page. The value of the seed determines the key. 2 Obtain the key from the Lexmark Customer Support Center. 3 Send the @PJL LBYPASSPASSWORD command to the printer by any port. If the correct key is specified, then a modified version of the directory is produced. The directory indicates the appropriate password for the flash or disk.
@PJL LBYPASSPASSWORD KEY = key [<CR>]<LF>
1
Send the
LQUERYSEED
command to the printer by one of the host computer interfaces.
This command displays a value called the
seed
on the control panel through MarkVision Enterprise. If the
printer does not have a control panel, then the
seed
is printed on the Menu Settings Page. The value of the
seed
determines the
key
.
2
Obtain the
key
from the Lexmark Customer Support Center.
3
Send the
@PJL LBYPASSPASSWORD
command to the printer by any port.
If the correct
key
is specified, then a modified version of the directory is produced. The directory indicates
the appropriate password for the flash or disk.
Printer job language
90