Lexmark B2865 Printer Languages and Interfaces Technical Reference - Page 19
Select Stroke Weight, Select Typeface, Select Font by Font ID, Select Default Font
View all Lexmark B2865 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Printer Control Language (PCL) emulation 19 Command / Parameters Function / Result ESC(s#B (primary) ESC)s#B (secondary) -7-Ultra Thin -6-Extra Thin -5-Thin -4-Extra Light -3-Light -2-Demi Light -1-Semi Light 0-Medium (Default) 1-Semi Bold 2-Demi Bold 3-Bold 4-Extra Bold 5-Black 6-Extra Black 7-Ultra Black Select Stroke Weight Selects a font with a particular thickness. Note: This command will not alter the stroke weight of an available font. ESC(s#T (primary) Select Typeface ESC)s#T (secondary) Selects the best fit font design. Where: To obtain the typeface values for downloaded fonts, print the font list from the control # = typeface identifier (0- panel or through MarkVision Enterprise. See your printer documentation for more 65535). information. On the printout, the typeface number is the last number on the font selection command example line. The example line is below the name of the font. In the following example, the typeface number is underlined: RO Courier ((s0ph0s0b4099T ESC(#X (primary) ESC)#X (secondary) Where: # = font ID (0-32767). Select Font by Font ID ESC(3@ (primary) ESC)3@ (secondary) Select Default Font Sets all font selection characteristics to the default font. ESC&p#X[data] Where: # = number of data of bytes to print as text. Transparent Print Data Prints the next number of bytes as text. ESC&d#D 0,1-Fixed 2-Fixed - double 3-Floating 4-Floating - double Select Underline Type (Enable) • Fixed underline is drawn 5 pels below cursor position. • Floating underline position is determined by all the positions of the characters with descenders in the fonts that are to be underlined. • Underline thickness is 1/100 inch.