Lexmark C2535 Users Guide PDF - Page 11
Selecting a location for the printer, CAUTION-POTENTIAL INJURY, CAUTION-SHOCK HAZARD
View all Lexmark C2535 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Learning about the printer 11 Selecting a location for the printer • Leave enough room to open trays, covers, and doors and to install hardware options. • Set up the printer near an electrical outlet. CAUTION-POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible. CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, do not place or use this product near water or wet locations. • Make sure that airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard. • Provide a flat, sturdy, and stable surface. • Keep the printer: - Clean, dry, and free of dust - Away from stray staples and paper clips - Away from the direct airflow of air conditioners, heaters, or ventilators - Free from direct sunlight and humidity extremes • Observe the temperature range. Operating temperature 10 to 32.2°C (50 to 90°F) • Allow the following recommended amount of space around the printer for proper ventilation: 1 Top 254 mm (10 in.) 2 Rear 102 mm (4 in.) 3 Right side 76 mm (3 in.) 4 Front 508 mm (20 in.) Note: The minimum space needed in front of the printer is 75 mm (3 in.) 5 Left side 76 mm (3 in.)