Lexmark C532 User's Guide - Page 23
into place., Reinstall the system board access cover. For more information
View all Lexmark C532 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4 Attach the ribbon cable to the hard disk. 5 Align the screw holes on the mounting plate with the holes in the hard disk. 6 Secure the mounting plate to the hard disk with the screws. 7 Press the ribbon cable connector into the connector on the system board. 8 Flip the hard disk over, and then press the three posts on the mounting plate into the holes on the system board. The hard disk snaps into place. 1 2 9 Reinstall the system board access cover. For more information, see "Reinstalling the system board access cover" on page 25. Installing options 23
4
Attach the ribbon cable to the hard disk.
5
Align the screw holes on the mounting plate with the holes in the hard disk.
6
Secure the mounting plate to the hard disk with the screws.
7
Press the ribbon cable connector into the connector on the system board.
8
Flip the hard disk over, and then press the three posts on the mounting plate into the holes on the system board.
The hard disk
snaps
into place.
2
1
9
Reinstall the system board access cover. For more information, see “Reinstalling the system board access cover”
on page 25.
Installing options
23