Lexmark C532N Help Menu Pages - Page 9
Abcde
UPC - 734646258500
View all Lexmark C532N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Print quality guide Page 9 of 34 Color misregistration Example ABCDE ABCDE Cause Color has shifted outside of the appropriate area or has been superimposed over another color area. Solution • Adjust the color alignment. For more information, see "Adjusting the color alignment" on page 9. • Remove and reinstall the photoconductors. For more information about installing supplies, see the User's Guide on the Software and Documentation CD. Note: If you have not resolved the issue, adjust the color alignment again. Adjusting the color alignment 1 Make sure the printer is turned off. 2 From the control panel, press and hold and while turning the printer on. 3 Release both buttons when Performing Self Test appears. The printer performs its power-on sequence, and then Config Menu appears. 4 Press until Color Alignment appears, and then press . 5 Press again to print the alignment page. 6 Press until Set A appears, and then press . 7 From the printed sheet, find the straightest of the 20 lines beside the letter A. 8 Press or until that number is displayed, and then press . Submitting Selection appears. 9 Repeat steps 6 through 8 to align sets A through L. 10 Press . 11 Press until Exit Config Menu appears, and then press . Resetting the Printer appears briefly, followed by a clock, and then Ready appears.