Lexmark C534DN Technical Reference - Page 73

2-61 PCL Table 2-19: Font Selection (Continued) Command / Parameters ESC(s#B (primary) ESC)s#B (secondary) -7 Ultra Thin -6 Extra Thin -5 Thin -4 Extra Light -3 Light -2 Demi Light -1 Semi Light 0 Medium (Default) 1 Semi Bold 2 Demi Bold 3 Bold 4 Extra Bold 5 Black 6 Extra Black 7 Ultra Black ESC(s#T (primary) ESC)s#T (secondary) # Typeface identifier (0 - 65535) Note: For a list of typeface numbers, see Table 2-2 on page 2-9 and "Font and Symbol Set Support for the Lexmark C520, C522n, C524, C524n, C524dn, C530dn, C532n, C532dn, C534n, C534dn, C534dtn, C770, C770n, C772, C772n, C920, C920n, C920dn, C920dnf" on page 2-8. ESC(#X (primary) ESC)#X (secondary) # = Font ID (0 - 32767) ESC(3@ (primary) ESC)3@ (secondary) ESC&p#X[data] # = number of data of bytes to print as text ESC&d#D 0,1 Fixed 2 Fixed - double 3 Floating 4 Floating - double ESC&d@ Function / Result Select Stroke Weight Selects a font with a particular thickness. Note: This command will not alter the stroke weight of an available font. Select Typeface Selects the best fit font design. To obtain the typeface values for downloaded fonts, print the font list from the printer operator panel or through MarkVision Professional. See your printer documentation for more information. On the printout, the typeface number is the last number on the font selection command example line. The example line is below the name of the font. In the following example, the typeface number is underlined: RO Courier ((s0ph0s0b4099T Select Font by Font ID Selects the font by the identification number. Select Default Font Sets all font selection characteristics to the Default Font. Transparent Print Data Prints the next number of bytes as text. Select Underline Type (Enable) Notes: • Fixed underline is drawn 5 pels below cursor position. • Floating underline position is determined by all the positions of the characters with descenders in the fonts that are to be underlined. • Underline thickness is 1/100 inch. Underline - Disable