Lexmark C710 User's Guide - Page 48
Job Acct Stat, Warning, Menu item, Values - error codes
UPC - 734646151009
View all Lexmark C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Utilities Menu (continued) Menu item Format Disk Values Yes No Job Acct Stat Formatting the hard disk option deletes all resources stored on the hard disk and prepares the disk to receive new resources. You may want to select Print Directory before you format the disk to determine what resources, if any, are stored on the disk. The Format Disk menu item is not displayed if the installed option is defective or is Read/Write or Write protected. Format Disk is also not displayed if Job Buffer Size is set to 100%. Warning: If you select Format Disk and then press Go, any data stored on the hard disk is lost. Do not turn the printer off while the hard disk is formatting. Print Clear Hex Trace If you have an optional disk installed in your printer and you are using the printer's Job Accounting function, you can choose to print a list of statistics for a defined number of the most recent print jobs. (The number of jobs is determined by the value of the Job Acct Limit menu item in the Setup Menu.) The statistics include whether the job printed with or without errors, the time required to print the job, the size (in bytes) of the job, the requested paper size and paper type, the total number of printed pages, and the number of copies requested. Select Clear to delete all accumulated job statistics from the optional disk. Note: You cannot print a list of statistics if the disk is read/write protected. You cannot clear job statistics from the disk if the disk is write protected or read/write protected. Press Select to enter Hex Trace mode. Hex Trace helps isolate the source of a print job problem. With Hex Trace selected, all data sent to the printer is printed in hexadecimal and character representation. Control codes are not run. To exit Hex Trace, turn the printer off, or reset the printer. To reset the printer, press Menu> or or