Lexmark C710 Technical Reference - Page 91
Table 2-36, Raster Graphics Continued, Set Raster Compression Mode, Transfer Raster Data by Row/Block
UPC - 734646151009
View all Lexmark C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
2-79 PCL Table 2-36: Raster Graphics (Continued) Command / Parameters Function / Result ESC*b#M Set Raster Compression Mode 0 1 2 3 5 9 999 1002 1003 1004 1005 1006 1007 1008 Uncoded (Default) Run-Length Encoded Tagged Image File Format (TIFF) byte Delta Row Adaptive Compression Replacement Delta Row Zlib Group 4 Group 3 one dimensional Group 3 two dimensional K=2 Group 3 two dimensional K=4 TIFF word (16 bit) TIFF double-word (32 bit) Adaptive compression (includes TIFF word and TIFF double-word) Identifies the compression mode the host uses to transfer RIG data. For instance, this command can be run-length encoding or TIFF encoding. Note: For further information, see "Raster Compression Mode" on page 2-89 and "Group 3 and Group 4 Raster Compression" on page 2-94. ESC*b#W[data] Transfer Raster Data by Row/Block # = Number of Data Bytes Transfers RIG data. Note: After each command, the cursor position is moved to the beginning of the next raster row. ESC*rB End Raster Graphics (Version B) Signals end of raster graphics transfer. If a Raster Height is specified, the cursor is moved to the first raster row past the Raster Height. ESC*rC End Raster Graphics (Version C) Same as Version B, but: • Resets compression mode to uncoded. • Sets left graphics margin to 0. ESC*t#H Raster Width (Destination) Sets the width of the destination raster.