Lexmark C780 User's Guide - Page 15
Installing a StapleSmart finisher, Installing memory and option cards - system board
View all Lexmark C780 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installing and removing options Installing a StapleSmart finisher Your printer supports a StapleSmart finisher. See the information sheet included with the finisher for detailed installation instructions. Installing memory and option cards CAUTION: If you are installing memory or option cards sometime after setting up the printer, turn the printer off and unplug the power cord before continuing. If you have any other devices connected to the printer, turn them off as well and unplug any cables going to the printer. Removing the system board access cover 1 Locate the access cover on the back of the printer. 2 Remove the four access cover screws (two at top, two at bottom). 3 Remove the access cover. 4 Use the illustration to locate the connector for the card you want to install. Option card connector Firmware and flash memory card connectors Memory card connector Hard disk connector Installing a StapleSmart finisher 15