Lexmark C920 Menus and Messages - Page 42

Message Action Delete all confidential jobs • Select Continue to delete all held jobs. • Press Stop to cancel the operation. Deleting Wait for the message to clear. Disabling DLEs Wait for the message to clear. Disabling Menus Wait for the message to clear. Note: While the menus are disabled, you cannot change the printer settings from the operator panel. Disk corrupted The printer has attempted a disk recovery process, and cannot repair the disk. • Select Continue to reformat the disk and delete all files currently stored on the disk. • Select Do not reformat to clear the message without reformatting the disk. Disk Recovery x/5 yyy% Warning: Do not turn the printer off while this message is displayed. The printer is attempting to recover the hard disk. Disk recovery takes place in five phases; the operator panel displays the percent complete of the current phase. Wait for the message to clear. Empty hole punch box • Empty the hole punch box, and if necessary, reset the hole punch counter. • Select Continue to clear the message and print without using the hole punch feature. Enabling Menus Wait for the message to clear. Encrypting Disk yyy% DO NOT POWER OFF Warning: Do not turn the printer off while this message is displayed. The printer is encrypting the hard disk. The percent complete is displayed. Wait for the message to clear. Engine Warming Wait for the message to clear. Enter PIN Enter the PIN you identified in the driver when you sent the confidential job to the printer. Enter PIN to lock Enter the correct pin number to lock the operator panel and prevent menu changes. Error printing from USB drive Wait for the message to clear. Error reading USB drive Wait for the message to clear. Flushing buffer Wait for the message to clear. Formatting Disk yyy% DO NOT POWER OFF Warning: Do not turn the printer off while this message is displayed. The printer is formatting the hard disk. The percent complete is displayed. Wait for the message to clear. Formatting Flash DO NOT POWER OFF Warning: Do not turn the printer off while this message is displayed. Wait for the message to clear. Fuser Life Warning • Select Continue to clear the message and print without installing a new fuser. • Install a new fuser. Insert Staple Cartridge • Install a staple cartridge to clear the message. • Select Continue to clear the message and print without using the staple feature. Insert Tray Insert the specified tray into the printer. Insert hole punch box • Install the hole punch box. • Select Continue to clear the message and print without using the hole punch feature. Internal System Error Reload Bookmarks • Reload the Bookmarks. • Select Continue to clear the message and continue printing. Internal System Error, Reload Security Certificates • Reload the Security Certificates. • Select Continue to clear the message and continue printing. Understanding printer messages 42