Lexmark C920 IPDS Printer and Host Setup Guide - Page 56
PSF/MVS, PSF/2, PSF/AIX, PSF/400 with OS/400 V3R1 or V3R6, V3R7, V4R1-R5, or V5R1-R4, or greater
View all Lexmark C920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
IPDS Printer and Host Setup Guide Printer Messages and Problems PSF/MVS PSF Startup Proc: Disconnect Interval (DISCINTV) PSF/2 TCP/IP Settings: Connect Timeout Tuning Option: Job Interval Shutdown Timer PSF/AIX SMIT Printer Def: Connect Timeout 15 seconds 30 seconds 30 seconds 30 seconds IPDS Timeout = 15 seconds to 10 minutes (when using the Standard Network port or a MarkNet internal LAN print server) Note: The printer defaults to Host Controlled when receiving IPDS jobs on port 9100. If you selected the IPDS Timeout value of Host Controlled in order to allow the host to directly control ending (disconnecting) a LAN session, go to IPDS Timeout = Host Controlled above (page 55). If you selected an IPDS Timeout value of 15 seconds to 10 minutes in order to allow the printer IPDS emulation to determine when an IPDS LAN session times out, follow the steps below to correct the problem. 1 Disable the printer's Network Job Timeout by setting it to 0. For instructions on how to do this, see the "Configure the Printer's Network Job Timeout" step in the chapter in this guide that describes your host environment. 2 Change the host port setting to 5001 or 9600. Refer to "Printer and Host Timeout Values" [page 50] for valid values. Additional information on the IPDS Timeout and port settings may be found in the IPDS Emulation User's Guide. 3 After changing the host port setting to 5001 or 9600, correct the appropriate host timer/timeout value as shown below. Note: The host timer/timeout values below should not be used with a host port value of 9100. PSF/400 with OS/400 V3R1 or V3R6 WRKAFP2: Inactivity Timer (INACTTMR) PSF/400 with OS/400 V3R2, V3R7, V4R1-R5, or V5R1-R4 or greater CRTPSFCFG: Release Timer (RLSTMR) PSF/MVS PSF Startup Proc: Disconnect Interval (DISCINTV) PSF/2 TCP/IP Settings: Connect Timeout Tuning Option: Job Interval Shutdown Timer PSF/AIX SMIT Printer Def: Connect Timeout *NOMAX *NOMAX 0 0 9999 0 56