Lexmark CS417 User Guide - Page 68
Custom Types menu, Universal Setup menu, Notes, Recycled, Units of Measure, Portrait Width
![]() |
View all Lexmark CS417 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Understanding the printer menus 68 Custom Types menu Use Custom Type [x] Paper Card Stock Transparency Glossy Rough/Cotton Labels Envelope Recycled Paper Card Stock Transparency Glossy Rough/Cotton Labels Envelope Universal Setup menu Use Units of Measure Inches Millimeters Portrait Width 3-14.17 inches 76-360 mm Portrait Height 3-14.17 inches 76-360 mm To Associate a paper or specialty media type with a factory default Custom Type [x] name or a user‑defined custom name created in the Embedded Web Server or MarkVisionTM Professional. Notes: • Paper is the factory default setting for Custom Type [x]. • The custom media type must be supported in the selected tray or feeder in order to print from that source. Specify a paper type when Recycled is selected. Notes: • Paper is the factory default setting. • The Recycled paper type must be supported in the selected tray or feeder in order to print from that source. To Identify the units of measure. Notes: • Inches is the U.S. factory default setting. • Millimeters is the international factory default setting. Set the portrait width. Notes: • If the width exceeds the maximum, then the printer uses the maximum width allowed. • 8.5 inches is the U.S. factory default setting. You can increase the width in 0.01‑inch increments. • 216 mm is the international factory default setting. You can increase the width in 1‑mm increments. Set the portrait height. Notes: • If the height exceeds the maximum, then the printer uses the maximum height allowed. • 14 inches is the U.S. factory default setting. You can increase the height in 0.01‑inch increments. • 356 mm is the international factory default setting. You can increase the height in 1‑mm increments.
![](/manual_guide/products/lexmark-cs417-user-guide-ab3dcd7/68.png)