Lexmark CS725 User Guide - Page 44
Replacing the fuser, CAUTION-HOT SURFACE - fuser replacement
View all Lexmark CS725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Maintaining the printer 44 2 Remove the waste toner bottle. 3 Unpack the new waste toner bottle. 4 Insert the new waste toner bottle. 5 Close door B. Replacing the fuser 1 Turn off the printer, and then unplug the power cord from the electrical outlet. 2 Open doors A and D. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching it.
2
Remove the waste toner bottle.
3
Unpack the new waste toner bottle.
4
Insert the new waste toner bottle.
5
Close door B.
Replacing the fuser
1
Turn off the printer, and then unplug the power cord from the electrical outlet.
2
Open doors A and D.
CAUTION—HOT SURFACE:
The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching it.
Maintaining the printer
44