Lexmark CS728 Embedded Web Server Administrator s Guide - Page 41
Setting the date and time
View all Lexmark CS728 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Lexmark Confidential until announced Securing printers 41 4 If necessary, from the Miscellaneous Settings section, configure the following settings: • Character Encoding-Select the character encoding used for the configuration file. • Disable Reverse IP Lookups 5 Click Save and Verify. Setting the date and time When using Kerberos authentication, make sure that the time difference between the printer and the domain controller does not exceed five minutes. You can manually update the date and time settings or use the Network Time Protocol (NTP) to sync the time with the domain controller automatically. 1 From the Embedded Web Server, click Settings > Device > Preferences > Date and Time. Configuring manually Note: Configuring the date and time manually disables NTP. a From the Configure section, in the "Manually Set Date and Time" field, enter the appropriate date and time. b Select the date format, time format, and time zone. Note: If you select (UTC+user) Custom, then specify the offset values for UTC (GMT) and DST. Configuring NTP a From the Network Time Protocol section, select Enable NTP, and then type the IP address or host name of the NTP server. b If the NTP server requires authentication, then in the Enable Authentication menu, select MD5 key. c Depending on your printer model, either enter the key ID and password, or browse to the file containing the NTP authentication credentials. 2 Click Save.