Lexmark CS730 Printer Languages and Interfaces Technical Reference - Page 26
Transfer Raster Data by Row/Block, End Raster Graphics Version B
View all Lexmark CS730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Printer Control Language (PCL) emulation 26 Command / Parameters ESC*b#M 0-Uncoded (Default) 1-Run-Length Encoded 2-Tagged Image File Format (TIFF) byte 3-Delta Row 5-Adaptive Compression 9-Replacement Delta Row 999-Zlib 1002-Group 4 1003-Group 3 one dimensional 1004-Group 3 two dimensional K=2 1005-Group 3 two dimensional K=4 1006-TIFF word (16 bit) 1007-TIFF double-word (32 bit) 1008-Adaptive compression (includes TIFF word and TIFF double-word) ESC*b#W[data] Where: # = number of data bytes. ESC*rB ESC*rC ESC*t#H ESC*t#V Function / Result Set Raster Compression Mode Identifies the compression mode the host uses to transfer RIG data. For instance, this command can be run-length encoding or TIFF encoding. Note: For more information, see "Raster compression mode" on page 34. Transfer Raster Data by Row/Block Transfers RIG data. Note: After each command, the cursor position is moved to the beginning of the next raster row. End Raster Graphics (Version B) Signals the end of the raster graphics transfer. If a raster height is specified, then the cursor is moved to the first raster row past the raster height. End Raster Graphics (Version C) Same as version B, but: • Resets the compression mode to uncoded. • Sets the left graphics margin to 0. Raster Width (Destination) Sets the width of the destination raster. Raster Height (Destination) Sets the height of the destination raster.