Lexmark CX510 Quick Reference - Page 20
jam, open front door [20y.xx]
View all Lexmark CX510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3 Pull the green lever to open the fuser cover. 6 Close the front door. 5 Slide and hold the release latch on the right side of the printer, and then slowly close the top door. 7 From the printer control panel, touch Done to clear the message and continue printing. [x]‑page jam, open front door [20y.xx] 1 Open the front door. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 4 Hold down the fuser cover, and then remove the jammed paper. Note: Make sure all paper fragments are removed. 2 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 20
3
Pull the green lever to open the fuser cover.
4
Hold down the fuser cover, and then remove the jammed paper.
Note:
Make sure all paper fragments are removed.
5
Slide and hold the release latch on the right side of the printer, and
then slowly close the top door.
6
Close the front door.
7
From the printer control panel, touch
Done
to clear the message
and continue printing.
[x]
‑
page jam, open front door [20y.xx]
1
Open the front door.
CAUTION—HOT SURFACE:
The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.
2
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note:
Make sure all paper fragments are removed.
20