Lexmark CX931 Quick Reference - Page 12
Loading the 2520-sheet tandem tray, For one, sided printing
View all Lexmark CX931 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Notes: • Do not slide paper into the tray. • Make sure that the side guides fit snugly against the paper. • Make sure that the stack height is below the maximum paper fill indicator. Overfilling may cause paper jams. • For one-sided printing, load paper with the printable side faceup. • For two-sided printing, load paper with printable side facedown. When loading letterhead or prepunched paper, do either of the following: For one‑sided printing • Load letterhead faceup with the header toward the back of the tray. 2 Adjust the guides to match the size of the paper that you are loading. 5 Insert the tray. If necessary, set the paper size and type to match the paper loaded in the tray. Note: When a finisher is installed, the images are rotated to 180° when printed. Loading the 2520-sheet tandem tray CAUTION-TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the tray. Note: To avoid jams, do not pull out trays while the printer is busy. 3 Flex, fan, and align the paper edges before loading. 4 Load the paper. 12 • Load prepunched paper faceup with the holes against the left side of the tray.