Lexmark Consumer Inkjet Getting Started - Page 38
Check your security keys
View all Lexmark Consumer Inkjet manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
3 Insert the CD for Macintosh. 4 From the Finder desktop, double-click the Lexmark 1400 Series Installer icon 5 Double-click the Install icon. 6 Click Continue. 7 Follow the instructions on the computer screen. 8 Store the SSID in a safe place for future reference. Check your security keys A security key is like a password. All devices on the same network share the same security key. Note: Make sure you copy down the security key exactly, including any capital letters, and store it in a safe place for future reference. The security key must follow the following criteria. WEP key • Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A-F and 0-9. • Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard. WPA-PSK or WPA2-PSK key • Up to 64 hexadecimal characters. Hexadecimal characters are A-F and 0-9. • Between 8 and 64 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard. Wireless Setup Utility cannot communicate with the printer during installation (Windows users only) These are possible solutions for Windows users. Try one or more of the following: Check power If the light is not on, see "Power button is not lit" on page 34. Check the installation cable 1 Disconnect the installation cable and check it for any obvious damage. 2 Firmly plug the rectangular end of the USB cable into the USB port of the computer. The USB port is marked with the USB symbol . 3 Firmly plug the square end of the USB cable into the USB port on the back of the printer. 4 Cancel the software installation. 5 Click Start Programs or All Programs Lexmark 1400 Series. 6 Click Wireless Setup. 7 Follow the prompts on the computer screen to reinstall the software. 38