Lexmark Dot Matrix Quick Reference - Page 44
Buffer, Auto LF, Zero Slash, Download to NLQ II available for 2580/2581 models only, Code Sub.
View all Lexmark Dot Matrix manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Buffer • Minimum-Sets the receive buffer size to zero • Maximum-For 2580/2581 models, sets the receive buffer size to 64KB or 480KB, depending on whether NLQ II (Near Letter Quality) Download is enabled • Maximum-For 2590/2591 models, sets the receive buffer size to 47.5KB or 480KB, depending on whether Download is enabled Note: Maximum is the factory default setting. Auto LF Requires a line feed to occur. • On-A line feed is performed for each Carrier Return (CR) code received. • Off-A line feed does not occur when a CR code is received. Note: Off is the factory default setting. Auto CR Requires a CR to occur. • On-A CR is performed for each line feed code received. • Off-A CR does not occur when a line feed code is received. Note: Off is the factory default setting. Zero Slash • On-The zero (0) prints with a slash down the middle. • Off-The zero (0) prints without a slash down the middle. Note: Off is the factory default setting. Download to NLQ II (available for 2580/2581 models only) • Enabled-Reserves a portion of the receive buffer for downloading fonts • Disabled-Uses the entire buffer as a receive buffer Note: Enabled is the factory default setting. Download (available for 2590/2591 models only) • Enabled-Reserves a portion of the receive buffer for downloading fonts • Disabled-Uses the entire buffer as a receive buffer Note: Enabled is the factory default setting. Code Page Sub. • Enabled-Substitutes code page 858 for 850 to allow older programs access to the European characters • Disabled-No code page substitution Note: Disabled is the factory default setting. Understanding Setup mode and menu options 44