Lexmark Dot Matrix User's Guide - Page 85
Setting Top-Of-Form, Setting Top-Of-Form for continuous form paper in push mode, Load/Unload, FormFeed
View all Lexmark Dot Matrix manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Loading paper Setting Top-Of-Form Top-Of-Form sets the first line of print. Use the operator panel to save your Top-of-Form settings for continuous forms, a cut form, and for each macro enabled. Setting Top-Of-Form for continuous form paper in push mode Top-Of-Form can range from minus 1 inch to plus 14 inches from the top of continuous form paper. Note: Use this method to also set Top-Of-Form for continuous forms loaded in the optional Tractor 2 Feeder. To set and save Top-Of-Form: 1 Clear the paper path. The Paper Out light blinks if no paper is loaded. If the Paper Out light is Off, tear off excess forms and press Load/Unload. If an individual form is loaded, press FormFeed to clear paper path. 2 Make sure the paper select lever is in the continuous forms position. 3 Load continuous form paper on the push tractor feed pins (or Tractor 2 feed pins if you are using the optional Tractor 2 Feeder). For help loading paper, see "Loading continuous forms using the push tractor" on page 48. 4 Remove the ribbon access cover. 5 Press Load/Unload. The paper moves to the current Top-Of-Form. The Paper Out light goes Off. 81