Lexmark E320 Technical Reference - Page 305
Searchable, Device Parameters for the IODevice %flash1, ioerror, Definition, Read-only If
UPC - 734646511162
View all Lexmark E320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 305 highlights
4-109 PostScript Table 4-21: PostScript Emulation Device Parameters (Continued) Key Type Definition Mounted boolean True False System attempts to mount the disk. System attempts to dismount the disk. A device must contain a valid file system to mount successfully. When a device is mounted, it is known to the system and is readable. To verify if the device is currently mounted, query this parameter immediately after setting it. PhysicalSize integer (Read-only) Indicates the size of the disk (in pages). Valid only when the disk is mounted. A value of 0 (zero) indicates that the device is not mounted. Removable boolean (Read-only) Indicates if the drive supports removable disks. Always returns False. Searchable boolean (Read-only) Indicates if the disk participates in searches in the file system operations that specify a filename without specifying a device. SearchOrder integer (Read-only) If the Searchable parameter is True, indicates the priority assigned to the disk when searching for a file and no device has been specified. A lower integer indicates a higher priority. If the Searchable parameter is False, this value is ignored. Type name (Read-only) Always returns the value of /FileSystem. Writeable boolean (Read-only) Indicates if the files on the disk can be opened for write access. If the disk is write protected, this parameter is a constant equal to False. When the disk is not mounted, this parameter indicates if the drive supports writeable media. Device Parameters for the IODevice %flash1% BlockSize integer (Read-only) Free integer (Read-only) Indicates the amount of free space available (in pages) on the flash. Valid if the flash is mounted (mounted is set to True). A value of 0 (zero) indicates that either the flash is not mounted or is full. HasNames boolean (Read-only) Indicates if the flash parameter is only valid when flash is mounted (mounted is set to True). If flash is not mounted, the parameter has a value of False. InitializeAction integer Specifies an action for initializing flash: 0 Indicates no action; the value returned when the parameter is read. 1 Indicates that the current file system should be deleted and a new one of PhysicalSize created (the flash must be formatted already). The flash must first be mounted; otherwise, an ioerror results. 2 Reformats the entire flash before creating a new file system of PhysicalSize 3 (or greater) has the same effect as the value 2 and also tests the flash x - 2 times Legal value: Any non-negative integer.