Lexmark E323 Technical Reference - Page 343
Setting Up the Communications Port Using Windows XP
UPC - 734646384216
View all Lexmark E323 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 343 highlights
8-5 Interfaces Setting Up the Communications Port Using Windows XP In your Windows XP application: 1 On the Menu bar, click Start. 2 Click Control Panel. The Control Panel screen displays. 3 Switch the Control Panel to Classic View. 4 Select the Hardware tab. 5 In the Device Manager area of the Hardware tab screen, click the Device Manager button. The Device Manager screen displays. 6 Scroll down to Ports and click the + once to expand the list of available Ports. 7 Select the communications port you want to configure and double-click. The Communications Port Properties screen for this specific port displays. For example, if you select the COM1 port, then the Communications Port [COM1] Properties screen displays. 8 Select the Port Settings tab. 9 Fill out the fields for the following printer settings to make them match your printer settings: • Bits per second • Data bits • Parity • Stop bits • Flow Control Note: For Flow Control, select Hardware if you want DTR protocol or Xon/ Xoff for Xon/Xoff protocol. 10 Click OK. 11 Close all windows now that the port is set up.