Lexmark E460 SCS/TNe Emulation User's Guide - Page 39
Task 3 - Configuring a Print Server, A. To check the installed print server firmware version, Ready
View all Lexmark E460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Task 3 Configuring a Print Server IMPORTANT: The SCS/TNe Emulation can only receive jobs through a single printer server. Moving the selected print server or inserting a new print server may cause a loss of SCS/TNe print capability. SCS/TNe Emulation printing requires a MarkNet internal print server or a Standard Network port on the printer. A. To check the installed print server firmware version 1 From a Ready state touch Menus. 2 Touch Reports. 3 Scroll until one or more of the following appears. If none of these appear, then you do not have a Standard Network or internal print server installed. a If Network Setup Page appears, touch it. This prints the Standard Network Card menu settings page. b If Network # Setup Page appears, touch it. This prints a settings page for the internal print server in slot #, where # is a number representing the slot in which the print server is installed. Mainframe Installation Setup: Task 3 -Configuring a Print Server 41