Lexmark Forms Printer 2481 Card Stock & Label Guide - Page 151
Ink contamination, Leading edge
View all Lexmark Forms Printer 2481 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Driver edge Embossing Feed Fiber content Fuse grade Fusing Glue contamination Grain Ink contamination Ironing Laser ink Laser-perfs Leading edge Matrix Micro-perfs Moisture content Nesting Offset powder Oil bleed Ooze Perforation For printers that use a fixed reference for feeding paper through the paper path (as opposed to printers that center paper in the path), the edge of the print material that is positioned next to the hardware reference and that is driven by the rollers in the printer. For most Lexmark printers, the driver edge is the left edge of a portrait page. Process of raising the surface of the base material by stamping an image or design with an embossing machine. The machine has a roll with a raised image on the surface. As the print material passes through the machine, the image is pressed into the material. See "Debossing" on page 150. How well the stock moves out of the paper tray and through the printer. The material used to manufacture the paper. Most high-quality xerographic paper is made from 100% chemically pulped wood. This content provides the paper with a high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as cotton have characteristics that can result in degraded paper feeding. Qualitative measurement of the adhesion of toner to the printed sheet. Printer process of melting toner and adhering it to the print material. See "Adhesive contamination" on page 150. The orientation of the fibers in the print material. Grain short indicates the fibers run the width of the paper. Grain long indicates the fibers run the length of the paper. Transfer of ink from a form to the printer's pick mechanism or fuser assembly, which can cause printer contamination. A mechanical process used during conversion to flatten stock. Inks that can withstand fuser temperatures of 225°C (437°F) and pressures to 25 psi without contaminating the printer or releasing hazardous fumes. Small perforations (20 to 30 perfs per inch) that create little paper dust and debris and do not normally cause nesting. Also known as micro-perfs or data-perfs. The edge of the print material that enters the printer paper path first. Unneeded portions of die-cut stock around labels. A stripped matrix is one that is removed to make it easier to peel labels from the liner. See "Laser-perfs" on page 151. The amount of moisture in the paper, which affects both print quality and paper feeding. Leave paper in its original wrapper until you are ready to use it. This limits the exposure of the paper to moisture changes that can damage the paper. To fit compactly together; to interlock; to stick together. A powder applied during some printing processes to help dry inks. Migration of materials from the substrate or the adhesive out to the face. This generally occurs in aged materials or materials exposed to extreme temperature changes. Also known as penetration, bleed through, and bleed. Migration of adhesive away from labels, which can cause printer contamination. Line of very small holes or slots punched to facilitate tearing. See also "Laser-perfs" on page 151. Glossary 151