Lexmark Forms Printer 2481 Technical Reference - Page 150
is the space width adjustment factor., space, Notes, To minimize the width of space modules, set
View all Lexmark Forms Printer 2481 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
An example of Code 39, with m = 0 and m = 1, follows: m = 0 (the human readable character is printed) m = 1 (the human readable character is not printed) s is the space width adjustment factor. This parameter affects only space modules. It can be used to adjust the width of space modules. The range for possible s values is: -3
Section 8: Barcodes
150
An example of Code 39, with
m
= 0 and
m
= 1, follows:
m
= 0 (the human readable character is printed)
m
= 1 (the human readable character is not
printed)
s
is the space width adjustment factor.
This parameter affects only
space
modules. It can be used to adjust the width of
space
modules.
The range for possible
s
values is: -3 <=
s
<= 3.
Notes:
•
The
s
value affects the actual width of the entire barcode.
To minimize the width of space modules, set
s
= xFD.
To maximize the width of space modules, set
s
= x03.
•
If an invalid
s
value is specified, it is ignored and the default value (
s
= 00) is used.
s value
248x space
module adjustment
249x space
module adjustment
-3, xFD
-3/240 inch
-3/360 inch
-2, xFE
-2/240 inch
-2/360 inch
-1, xFF
-1/240 inch
-1/360 inch
0, x00 (default)
0
0
1, x01
1/240 inch
1/360 inch
2, x02
2/240 inch
2/360 inch
3, x03
3/240 inch
3/360 inch