Lexmark Forms Printer 2580 Technical Reference - Page 63
Code s, Enabling code character support - series
View all Lexmark Forms Printer 2580 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Draft document 3-1 Enabling code page CHAPTER 3: Code Pages Enabling code page character support In addition to the standard support for the US and Western Europe code pages, the 2500 series forms printers include support for characters contained in a variety of other code pages. When the printer is switched to one of these modes, the new set of code pages replaces those supported in the standard operating mode. 1 Turn the printer off. 2 Raise the Ribbon access cover and manually move the Carrier all the way to the left (Carrier home position sensor = ON). {insert graphic} 3 Press and hold one or more buttons on layer 2 of the control panel while turning the printer on as described in the following table. Note: Buttons must be held until the printer initializes. Character Support Support on 258x Control Panel Buttons printers Support on 259x printers Standard Eastern Europe Micro up Micro down included included included includeda Baltic Set up included included Arabic Micro + Micro included included Levant Micro + Setup included requires flash download and replaces Eastern European supporta OCR-B Micro + Setup included requires flash download and replaces Eastern European supporta OKI must be enabled via included printer emulation settings. b not supported a. Eastern European support can be restored via flash download. This is only required if Levant or OCR-B has been downloaded.