Lexmark Forms Printer 2580n Lexmark Forms Printer 2500+ Series User's Guide - Page 53
Control options, Auto LF, Zero Slash, Download to NLQ II available for 2580+ or 2581+ models only
View all Lexmark Forms Printer 2580n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Understanding Setup mode and menu options 53 Auto LF Requires a line feed to occur. • On-A line feed is performed for each Carrier Return (CR) code received. • Off-A line feed does not occur when a CR code is received. Note: Off is the factory default setting. Auto CR Requires a CR to occur. • On-A CR is performed for each line feed code received. • Off-A CR does not occur when a line feed code is received. Note: Off is the factory default setting. Zero Slash • On-The zero (0) prints with a slash down the middle. • Off-The zero (0) prints without a slash down the middle. Note: Off is the factory default setting. Download to NLQ II (available for 2580+ or 2581+ models only) • Enabled-This reserves a portion of the receive buffer for downloading fonts. • Disabled-This uses the entire buffer as a receive buffer. Note: Enabled is the factory default setting. Download (available for 2590+ or 2591+ models only) • Enabled-This reserves a portion of the receive buffer for downloading fonts. • Disabled-This uses the entire buffer as a receive buffer. Note: Enabled is the factory default setting. Code Page Sub. • Enabled-This substitutes code page 858 for 850 to allow older programs access to the European characters. • Disabled-There is no code page substitution. Note: Disabled is the factory default setting. Control options Note: Use Setup mode to configure the printer according to your needs. To print a list of all default settings, press LineFeed from the Main menu. The following list items outline and explain the Control options and settings you can use with the printer: