Lexmark MC2425 Users Guide PDF - Page 134
ThinPrint, USB, Enable ThinPrint, Port Number, Bandwidth bits/sec, Packet Size kbytes, PCL SmartSwitch
View all Lexmark MC2425 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Understanding the printer menus 134 ThinPrint Menu item Description Enable ThinPrint Off On* Print using ThinPrint. Port Number 4000-4999 (4000*) Set the port number for the ThinPrint server. Bandwidth (bits/sec) 100-1000000 (0*) Set the speed to transmit data in a ThinPrint environment. Packet Size (kbytes) 0-64000 (0*) Set the packet size for data transmission. Note: An asterisk (*) next to a value indicates the factory default setting. USB Menu item Description PCL SmartSwitch Off On* Set the printer to switch to PCL emulation when a print job received through a USB port requires it, regardless of the default printer language. Note: If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. PS SmartSwitch Off On* Set the printer to switch to PS emulation when a print job received through a USB port requires it, regardless of the default printer language. Note: If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Job Buffering Off* On Temporarily store jobs on the printer hard disk before printing. Note: This menu item appears only when a hard disk installed. Mac Binary PS On Auto* Off Set the printer to process Macintosh binary PostScript print jobs. Notes: • When set to On, the printer processes raw binary PostScript print jobs from computers using the Macintosh operating system. • When set to Auto, the printer processes print jobs from computers using either Windows or Macintosh operating systems • When set to Off, the printer filters PostScript print jobs using the standard protocol. Enable USB Port Off On* Enable the standard USB port. Note: An asterisk (*) next to a value indicates the factory default setting.