Lexmark MS410 Quick Reference

Lexmark MS410 Manual

Get Lexmark MS410 PDF manuals and user guides View all Lexmark MS410 manuals
Add to My Manuals
Save this manual to your list of manuals

Lexmark MS410 manual content summary:

  • Lexmark MS410 | Quick Reference - Page 1
    printer activities, such as printing or downloading as the new user default setting. 7 printer is in Hibernate mode. Loading paper and specialty media Setting the paper size and type 1 From the printer control panel, navigate to: > Paper Menu > > Paper Size/Type > 2 Select Tray [x] Size or Tray
  • Lexmark MS410 | Quick Reference - Page 2
    Custom Type 6. • The paper type setting must be manually set for all trays. Configuring Universal paper settings The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus. Notes: • The largest supported Universal size is 216 x 355
  • Lexmark MS410 | Quick Reference - Page 3
    Load letterhead facedown, with the top edge of the sheet toward the front of the tray. For two‑sided printing, load letterhead faceup with the bottom edge of the sheet toward the front of the tray. • Make sure the paper is below the maximum paper fill indicator located on the side of the width guide
  • Lexmark MS410 | Quick Reference - Page 4
    From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray. Note: Set the correct paper size and type to avoid paper jams and print quality problems. Loading the multipurpose feeder Use the multipurpose feeder when printing on different
  • Lexmark MS410 | Quick Reference - Page 5
    fill indicator located on the paper guides. Overfilling may cause paper jams. transparencies, see the packaging that the transparencies came in. • Load letterhead faceup with the top edge entering the printer first. For two‑sided (duplex) printing, load letterhead facedown with the bottom edge
  • Lexmark MS410 | Quick Reference - Page 6
    operating system, access the Paper menu using the Local Printer Settings Utility or Printer Settings. Printing Printing a document Printing a document 1 From the Paper menu on the printer control panel, set the paper type and size to match the paper loaded. 2 Send the print job: For Windows users
  • Lexmark MS410 | Quick Reference - Page 7
    if necessary. Note: To print on a specific paper type, adjust the paper type setting to match the paper loaded, or select the appropriate tray or feeder. 3 Click Print. Adjusting toner darkness Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address
  • Lexmark MS410 | Quick Reference - Page 8
    indicated tray out, and then remove the jammed paper. Remove all paper from the multipurpose feeder, and then remove the jammed paper. Open the front door, and then remove the toner cartridge, imaging unit, and jammed paper. Jam, front door [20y.xx] CAUTION-HOT SURFACE: The inside of the printer
  • Lexmark MS410 | Quick Reference - Page 9
    expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light can cause print quality problems. 6 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 8 Insert the toner cartridge by aligning the
  • Lexmark MS410 | Quick Reference - Page 10
    it. 1 Pull the tray out completely. 2 2 Gently pull down the rear door. CAUTION-HOT SURFACE: The inside of the printer might be hot. To the printer control panel, press and continue printing. to clear the message Jam, standard bin [20y.xx] 1 Firmly grasp the jammed paper on each side, and
  • Lexmark MS410 | Quick Reference - Page 11
    are removed. 3 Firmly grasp the jammed paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. 4 Insert the tray. 5 From the printer control panel, press and continue printing. Jam, tray [x] [24y.xx] 1 Pull out the tray completely. to clear the message
  • Lexmark MS410 | Quick Reference - Page 12
    fan them. Do not fold or crease the paper. Straighten the edges on a level surface. 3 Reload paper into the multipurpose feeder. Note: Make sure the paper guide lightly rests against the edge of the paper. 4 From the printer control panel, press and continue printing. to clear the message 12
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
Quick Reference
Learning about the printer
Using the printer control panel
9
3
1
2
4
5
6
7
8
Use the
To
1
Menus button
Open the menus.
Notes:
•
The menus are available only when the
printer is in the Ready state.
•
Pressing the button while navigating
within the menus returns the printer
control panel to the top
‑
level menu
screen.
2
Display
View printing options as well as status and error
messages.
Use the
To
3
Sleep button
Enable Sleep mode or Hibernate mode.
Notes:
•
Pressing any hard button will cause the
printer to wake from Sleep mode.
•
Pressing the Sleep button or the power
switch will cause the printer to wake
from Hibernate mode.
4
Stop button
•
Exit the menus and return to the Ready
state.
•
Stop printer activities, such as printing or
downloading fonts.
5
Right arrow
button
•
Scroll through menus or to move between
screens and menu options.
•
Scroll through settings or text. For menus
with numeric values, press and hold an
arrow button to scroll through the settings.
Release the button when the value you
want appears.
6
Select button
•
Open a menu.
•
Display available values or settings for a
menu. The current default setting is
indicated by an asterisk (*).
•
Save the displayed value as the new user
default setting.
7
Left arrow
button
•
Scroll through menus or to move between
screens and menu options.
•
Scroll through settings or text. For menus
with numeric values, press and hold an
arrow button to scroll through the settings.
Release the button when the value you
want appears.
8
Back button
Return to the previous screen.
9
Indicator light
Determine the status of the printer.
Understanding the colors of the indicator
and Sleep button lights
The colors of the indicator and Sleep button lights on the printer control
panel signify a certain printer status or condition.
Indicator light color and its corresponding printer status
Indicator light
Printer status
Off
The printer is off or in Hibernate mode.
Blinking green
The printer is warming up, processing data,
or printing.
Solid green
The printer is on, but idle.
Blinking red
The printer requires user intervention.
Sleep button light color and its corresponding printer status
Sleep button light
Printer status
Off
The printer is off, idle or in Ready state.
Solid amber
The printer is in Sleep mode.
Blinking amber
The printer is entering or waking from
Hibernate mode.
Blinking amber for 0.1
second, then goes
completely off for 1.9
seconds in a slow, pulsing
pattern
The printer is in Hibernate mode.
Loading paper and specialty
media
Setting the paper size and type
1
From the printer control panel, navigate to:
>
Paper Menu
>
>
Paper Size/Type
>
2
Select
Tray [x] Size
or
Tray [x] Type
, and then press
.
3
Change the paper size or type setting, and then press
.
Notes:
•
The paper size setting for the standard 250
‑
sheet tray (Tray 1),
optional 250
‑
or 550
‑
sheet tray (Tray 2), and the multipurpose
feeder must be set manually in the Paper Size menu.
1