Lexmark MS410 Quick Reference - Page 7

2 From the Print dialog and pop‑up menus, adjust the settings if necessary. Note: To print on a specific paper type, adjust the paper type setting to match the paper loaded, or select the appropriate tray or feeder. 3 Click Print. Adjusting toner darkness Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Print Settings > Quality Menu > Toner Darkness. 3 Adjust the toner darkness setting. 4 Click Submit. Using the printer settings on the computer Depending on your operating system, adjust the toner darkness settings using the Local Printer Settings Utility or Printer Settings. Using the printer control panel 1 From the printer control panel, navigate to: > Settings > > Print Settings > Menu > > Toner Darkness > 2 Adjust the toner darkness. > Quality 3 Press . Printing information pages Printing a font sample list From the printer control panel, navigate to either of the following: > Reports > or > Print Fonts > > PCL Fonts > > Reports > Fonts > > Print Fonts > > PostScript Printing a menu settings page Print a menu settings page to review the current menu settings and to verify if the printer options are installed correctly. Note: If you have not changed any menu settings, then the menu settings page lists all the factory default settings. When you select and save other settings from the menus, they replace the factory default settings as user default settings. A user default setting remains in effect until you access the menu again, choose another value, and save it. From the printer control panel, navigate to: > Reports > > Menu Settings Page > Printing a network setup page If the printer is connected to a network, then print a network setup page to verify the network connection. This page also provides important information that aids network printing configuration. 1 From the printer control panel, navigate to: > Reports > > Network Setup Page > Note: If an optional print server is installed, then Print Network [x] Setup Page appears. 2 Check the first section of the network setup page and confirm that the status is Connected. If the status is Not Connected, then the LAN drop may not be active, or the network cable may be malfunctioning. Consult your system support person for a solution, and then print another network setup page. Canceling a print job Canceling a print job from the printer control panel From the printer control panel, press > . Canceling a print job from the computer For Windows users 1 Open the printers folder. In Windows 8 From the Search charm, type run, and then navigate to: Apps list > Run > type control printers > OK In Windows 7 or earlier a Click or click Start, and then click Run. b In the Start Search or Run dialog, type control printers. c Press Enter, or click OK. 2 Double‑click the printer icon. 3 Select the print job you want to cancel. 4 Click Delete. For Macintosh users 1 From the Apple menu, navigate to either of the following: • System Preferences > Print & Scan > select your printer > Open Print Queue • System Preferences > Print & Fax > select your printer > Open Print Queue 2 From the printer window, select the print job you want to cancel, and then delete it. 7