Lexmark MS610de User's Guide - Page 61
Adjusting Sleep mode, Using the Embedded Web Server, Notes, Settings, General Settings, Timeouts
![]() |
View all Lexmark MS610de manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Using MS510dn and MS610dn 61 Use On Off 3 Press . To Reduce printer noise. Notes: • Print jobs will process at a reduced speed. • Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed. Use factory default settings. Note: This setting supports the performance specifications of the printer. Adjusting Sleep mode To save energy, decrease the number of minutes before the printer enters Sleep mode. Select from 1 to 120. The factory default setting is 30 minutes. Note: The printer still accepts print jobs when in Sleep mode. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Navigate to: Settings > General Settings > Timeouts 3 In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode. 4 Click Submit. Using the printer control panel 1 From the printer control panel, navigate to: > Settings > > Settings > > General Settings > > Timeouts > > Sleep Mode > 2 In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode. 3 Press .
![](/manual_guide/products/lexmark-ms510-users-guide-0285a25/61.png)