Lexmark MS711 Supplies Guide - Page 2

Supplies Guide Page 2 of 3 Item Worldwide High Yield Toner Cartridge Extra High Yield Toner Cartridge 1 This cartridge is supported only in the MS710 printer model. 2 This cartridge is supported only in the MS711 printer model. Regular cartridge 520HA1 520XA2 Ordering an imaging unit Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner. For more information on replacing the imaging unit, see the instruction sheet that came with the supply. Part name Lexmark Return Program Regular Imaging unit 520Z 520ZA Ordering a maintenance kit To identify the supported fuser type, view the label on the fuser. Do either of the following: • Remove the toner cartridge and imaging unit. The two-digit fuser type code (such as 11 or 13) can be seen on the front of the fuser. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. • Pull down the printer rear door. The two-digit fuser type code (such as 11 or 13) can be seen on the rear of the fuser. Notes: • Using certain types of paper may require more frequent replacement of the maintenance kit. • The separator roller, fuser, pick rollers, and transfer roller are all included in the maintenance kit and can be individually ordered and replaced if necessary. • For more information on replacing the parts included in the maintenance kit, see the instruction sheet that came with each part. Lexmark Return Program fuser maintenance kit type Type MS710 Series Return Program fuser maintenance kit type 11, 110-120V MS710 Series Return Program fuser maintenance kit type 13, 220-240V MS710 Series Return Program fuser maintenance kit type 15, 100V Part number 40X8530 40X8531 40X8532 Lexmark regular fuser maintenance kit type Type MS710 Series regular fuser maintenance kit type 17, 110-120V MS710 Series regular fuser maintenance kit type 19, 220-240V Part number 40X8533 40X8534