Lexmark MS810n MS810 Series Disassembly of Waste Electrical and Electronic Equ - Page 1
Lexmark MS810n Manual
View all Lexmark MS810n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Disassembly of Waste Electrical and Electronic Equipment (WEEE) Manual EU Waste Electronic and Electrical Equipment Directive require producers to provide information of the different electronic and electrical materials and components found in their products at its end-of-life, and disassembly references to treatment and recycling facilities. The disassembly information for this product has been prepared for use by a recognized treatment or recycling facility and is not intended to be used by others. 1. Product information 2. Materials and components list for selective treatment 3. Disassembly tools 4. Disassembly references The following information is intended only for the use of treatment and recycling facilities. All disassembly instructions should be performed with the power switch in the OFF position. Disconnect the power cord from the wall outlet and from the printer before continuing. If there are any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1. Product information Model name(s)-Indicate all model name(s) within the product family Model name Lexmark MS810 series - Lexmark MS810n, Lexmark MS810dn, Lexmark MS810dtn, Lexmark MS810de (Lexmark M5155, Lexmark M5163), Lexmark MS811n, Lexmark MS811dn, Lexmark MS811dtn, Lexmark MS812dn, Lexmark MS812dtn, Lexmark MS812de (Lexmark M5170) * Add rows as needed 2. Materials and components list for selective treatment Items Polychlorinated biphenyls (PCB) containing capacitors Mercury containing components, such as switches or backlighting lamps Batteries Quantity 0 0 1 Printed circuit boards greater than 10 cm2 8 Toner cartridges, liquid and pasty, as well as colour 1 toner Notes N/A N/A Lithium Manganese Dioxide coin cell located on the system controller card Plus one (1) for MS810dtn, MS811dtn, MS812dtn models (locations illustrated in 4.2) Located inside front cover Doc No.: Rev. 001 Page 1 of 17