Lexmark MS811 Forms and Bar Code Card Technical Reference Guide - Page 95
Arguments for PDF417 bar code symbology, Default, Value, Definition
View all Lexmark MS811 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Arguments for PDF417 bar code symbology Key /Symbology Type Name /Type integer /Rows integer /Columns integer /AspectRatio real /Units /ModuleWidth integer /Height integer Default Value Definition Required Identifies the bar code symbology (/PDF417). Required If /Rows is set to 0, then /Columns is set manually. If /Rows is set to 1, then /Columns is determined by /AspectRatio. Required If /Type is set to 0, then the number of symbol rows is set manually. Valid values are 3 to 90. Any value outside this range causes a RANGECHECK error. Required If /Type is set to 0, then the number of symbol columns is set manually. Valid values are 1 to 30. Any value outside this range causes a RANGECHECK error. Required If /Type is set to 1, then the alternate way of designing rows and columns ratio is through height/width. Valid values are 0.1 to 10.0. Any value outside this range causes a value of 0.5 to be used. Example: For a height-to-width ratio of 2/3, set /AspectRatio equal to 0.67. Optional The value is 1/600 inch. Required Sets the module width in /Units. Specifies the X dimension (smallest element width) Example: A value of 15 specifies an element width of 15/600 inch. Required Specifies the bar height in terms of /ModuleWidth Example: When /ModuleWidth is set to 15, a value of 3 sets the bar height to 45/600 inch. Arguments for PDF417 bar code symbology 95