Lexmark MS811 Paper Guide - Page 2

Media Guide Page 2 of 4 Paper size1 Dimensions Standard or optional 250‑ or 550‑sheet trays Optional 2100‑sheet tray Multipurpose feeder Duplex 10 Envelope 105 x 241 mm X X (4.1 x 9.5 in.) DL Envelope 110 x 220 mm X X (4.3 x 8.7 in.) C5 Envelope 162 x 229 mm X X (6.38 x 9.01 in.) B5 Envelope 176 x 250 mm X X (6.93 x 9.84 in.) Other Envelope 98 x 162 mm X X (3.9 x 6.4 in.) to 176 x 250 mm (6.9 x 9.8 in.) 1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select Universal or turn off tray size sensing. For more information, contact customer support. 2 To support two‑sided (duplex) printing, the Universal width must be between 105 mm (4.13 inches) and 216 mm (8.5 inches); the Universal length must be between 148 mm (5.83 inches) and 356 mm (14 inches). Storing paper Use these paper storage guidelines to help avoid jams and uneven print quality: • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40%. Most label manufacturers recommend printing in a temperature range of 18 to 24°C (65 to 75°F) with relative humidity between 40 and 60%. • Store paper in cartons when possible, on a pallet or shelf, rather than on the floor. • Store individual packages on a flat surface. • Do not store anything on top of individual paper packages. Avoiding jams Load paper properly • Make sure paper lies flat in the tray.