Lexmark MS811 Supplies Guide - Page 2
Ordering an imaging unit, Ordering a maintenance kit - ms811n
View all Lexmark MS811 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Supplies Guide Page 2 of 3 Item Regular cartridge Worldwide High Yield Toner Cartridge 520HA1 Extra High Yield Toner Cartridge 520XA2 1 This cartridge is supported only in MS810n and MS810dn printer models. 2 This cartridge is supported only in MS811n, MS811dn, MS812dn, and MS812ne printer models. Ordering an imaging unit Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner. For more information on replacing the imaging unit, see the instruction sheet that came with the supply. Part name Lexmark Return Program Regular Imaging unit 520Z 520ZA Ordering a maintenance kit To identify the supported fuser type, view the label on the fuser. Do either of the following: • Remove the toner cartridge and imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of the fuser. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. • Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the fuser. Notes: • Using certain types of paper may require more frequent replacement of the maintenance kit. • The separator roller, fuser, pick rollers, and transfer roller are all included in the maintenance kit and can be individually ordered and replaced if necessary. • For more information on replacing the maintenance kit, see the instruction sheet that came with the supply. Lexmark Return Program fuser maintenance kits and part numbers for MS810, MS811, and MS812 Fuser maintenance kit type Part number Type 00 40X8420 Type 01 40X8421 Type 02 40X8422 Type 03 40X8423 Type 04 40X8424