Lexmark MS826 Users Guide PDF - Page 166
Step 1, Step 2, Settings, Print, Quality, Step 3, Notes, Step 4, Print Resolution
![]() |
View all Lexmark MS826 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Troubleshooting 166 Action Yes Step 1 Go to step 2. a Check if the printer is using a genuine and supported Lexmark toner cartridge. Note: If the cartridge is not supported, then install a supported one. b Print the document. Is the print light? Step 2 Go to step 3. a Turn off the printer, wait for about 10 seconds, and then turn on the printer. b Increase toner darkness. From the control panel, navigate to: Settings > Print > Quality c Print the document. Is the print light? Step 3 Go to step 4. a Depending on your operating system, specify the paper type from the Printing Preferences or Print dialog. Notes: • Make sure that the setting matches the paper loaded. • You can also change the setting on the printer control panel. b Print the document. Is the print light? Step 4 Check if the print resolution is set to 600 dpi. a From the control panel, navigate to: Settings > Print > Quality > Print Resolution b Print the document. Go to step 5. Is the print light? No The problem is solved. The problem is solved. The problem is solved. The problem is solved.
![](/manual_guide/products/lexmark-b2865-users-guide-pdf-3002d4d/166.png)