Lexmark MX6500e 6500e Card Copy Administrator's Guide - Page 4

Configuring Card Copy 4 Configuring Card Copy Accessing application configuration settings using the Embedded Web Server 1 Obtain the scanner IP address: • From the scanner home screen • From the TCP/IP section in the Network/Ports menu • By printing a network setup page or menu settings page, and then finding the TCP/IP section Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. 2 Open a Web browser, and then type the scanner IP address in the address field. The Embedded Web Server appears. 3 From the navigation menu on the left, click Settings > Apps > Apps Management. 4 From the list of installed applications, click the application you want to configure, and then click Configure. Configuring scanning options 1 Access the application configuration settings from the Embedded Web Server. 2 Change the default scanning options if necessary: • Default tray-Select the default paper tray to be used for printing scanned images. • Default number of copies-Specify the number of copies that should automatically print when the application is used. • Default contrast setting-Specify a setting to increase or decrease the level of contrast when a copy of the scanned card is printed. Select Best for Content if you want the scanner to adjust the contrast automatically. • Default scale setting-Set the size of the scanned card when printed. The default is 100% (full size). • Color Output-Select the check box to print the scanned card in color, or clear it to scan in black and white. • Resolution setting-Adjust the quality of the scanned card. • Multi Card Scan-Select the check box to scan multiple cards. This setting is available depending on the application you are using. • Print Borders-Select the check box to print the scanned image with a border around it. 3 Save or discard your changes. Do one of the following: • Click Restore Defaults to restore all fields to factory default settings. • Click Reset to cancel changes to all fields and begin again. • Click Apply to save changes to the profile. Note: Reset and Apply are the only options available on certain devices.