Lexmark MX810 Supplies Guide - Page 2
Ordering an imaging unit, Ordering a maintenance kit - series
View all Lexmark MX810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Supplies Guide Page 2 of 3 Item Return Program cartridge Africa, Middle East, Central Eastern Europe (non‑EU), and Commonwealth of Independent States (CIS) Toner Cartridge 625 High Yield Toner Cartridge 625H Extra High Yield Toner Cartridge 625X For more information on countries located in each region, visit www.lexmark.com/regions. Item Worldwide Extra High Yield Toner Cartridge Regular cartridge 620XA Ordering an imaging unit Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner. For more information on replacing the imaging unit, see the instruction sheet that came with the supply. Part name Lexmark Return Program Regular Imaging unit 520Z 520ZA Ordering a maintenance kit To identify the supported fuser type, view the label on the fuser. Do either of the following: • Remove the toner cartridge and imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of the fuser. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. • Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the fuser. Notes: • Using certain types of paper may require more frequent replacement of the maintenance kit. • The separator roller, fuser, pick rollers, and transfer roller are all included in the maintenance kit and can be individually ordered and replaced if necessary. • For more information on replacing the parts included in the maintenance kit, see the instruction sheet that came with each part. Lexmark Return Program fuser maintenance kit type Type MX810 Series Return Program fuser maintenance kit Type 00 MX810 Series Return Program fuser maintenance kit Type 01 MX810 Series Return Program fuser maintenance kit Type 02 MX810 Series Return Program fuser maintenance kit Type 03 MX810 Series Return Program fuser maintenance kit Type 04 Part number 40X8420 40X8421 40X8422 40X8423 40X8424