Lexmark Monochrome Laser 2000-Sheet Drawer User's Guide (1.2 MB) - Page 15
remain with the 2000-sheet drawer., provided with the printer. The 16 AWg power cord should
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
8 If you intend to operate your 2000-sheet drawer at 100 - 127V power, you must use the 16 AWG power cord provided with the unit. Plug the 16 AWG power cord into the back of the drawer and then into a properly grounded electrical outlet. Do not use the power cord provided with the printer; however, you may retain it for possible future use. For example, if you later decide to detach the current printer from the 2000-sheet drawer, and use the printer with other paper options, you should use the original power cord provided with the printer. The 16 AWg power cord should always remain with the 2000-sheet drawer. If you intend to operate your 2000-sheet drawer at 200 240V power, use the power cord provided with the printer. Plug the power cord into the back of the drawer and then into a properly grounded electrical outlet. 2000-Sheet Drawer User's Guide 9