Lexmark Monochrome Laser IPDS Emulation User's Guide - Page 59
Lexmark W850, X860de, X862de and X864de Optional Standard Finisher
View all Lexmark Monochrome Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
5.2.2.2 Lexmark W850, X860de, X862de and X864de Optional Standard Finisher The optional Standard Finisher supports Corner staple and Dual staple (IPDS Edge stitch). The printer automatically rotates the text 180 degrees for short-edge fed paper and 90 degrees for long-edge fed paper. If necessary, reformat your job on the host with a different text orientation to avoid stapled sets that are hard to read. Refer to your printer or finisher documentation to determine the staple location for various paper sizes. See Lexmark X860de, X862de and X864de MFPs Optional Advanced Finisher Functions (on page 60) for information on additional functions supported. Below are examples of job output statements that include the Form Definition to place staples in the printed output. Corner staple //OUT1 OUTPUT CLASS=C,COPIES=1,FORMDEF=FC0010 Dual staple //OUT1 OUTPUT CLASS=C,COPIES=1,FORMDEF=FE0010 Sending form definitions that specify invalid staple locations may cause an exception to be reported to the host. Drawings of staple placement for simplex form definitions FC0010 TEXT Text Text text text Text is shown with 0 degree rotation specified in IPDS job FE0010 Long-edge fed paper, leading edge FE0010 FC0010 TEXT Text, text. Text xxxxx Text is shown with 0 degree rotation specified in IPDS job Short-edge fed paper, leading edge 59