Lexmark Multifunction Laser C78x - Setup Guide - Page 34

Performing browser fax setup, Enter, Configuration, Fax Setup, Submit

Get Lexmark Multifunction Laser PDF manuals and user guides View all Lexmark Multifunction Laser manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Step 15: Setting up fax and IP addresses Performing browser fax setup Note: Configuration is a task usually done by a system support person. If you are prompted for a password during the following instructions, see your system support person for help. 1 Type the IP address of the MFP in the URL field of your browser (for example, http://192.168.236.24), and then press Enter. 2 Click Configuration. 3 Under the MFP heading, click Fax Setup. 4 Click Configuration. If you are changing fax modes, you must click Submit before you can access the configuration page. Note: During MFP power up, if the print server is configured to use Network Time Protocol (NTP) time, the current date and time are provided. However, you must set the time zone to get the correct time. 5 Enter the required FCC information: • Date and time (current date and time) • Station name (personal name or company name) • Station number (fax phone line number) 6 Select the Time Zone, such as Eastern (USA and Canada, Eastern Standard Time). This sets the required information. 7 Set your options for Rings to Answer, and so on. 8 After you finish entering the information, click Submit. Changing optional settings such as setting up a fax transmission log, creating permanent fax destinations, and enabling the fax server function can be changed through your browser or the MFP control panel. Note: If your region supports caller ID, you may have to change the default setting. There are two settings available; FSK (pattern 1) and DTMF (pattern 2). Contact your telecommunications company or switch the settings if the MFP does not identify incoming calls. Fax setup 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
Fax setup
34
Step 15: Setting up fax and IP addresses
Performing browser fax setup
Note:
Configuration is a task usually done by a system support person. If you are prompted for a password
during the following instructions, see your system support person for help.
1
Type the IP address of the MFP in the URL field of your browser (for example, http://192.168.236.24), and then
press
Enter
.
2
Click
Configuration
.
3
Under the MFP heading, click
Fax Setup
.
4
Click
Configuration
.
If you are changing fax modes, you must click
Submit
before you can access the configuration page.
Note:
During MFP power up, if the print server is configured to use Network Time Protocol (NTP) time, the
current date and time are provided. However, you must set the time zone to get the correct time.
5
Enter the required FCC information:
•
Date and time (current date and time)
•
Station name (personal name or company name)
•
Station number (fax phone line number)
6
Select the Time Zone, such as Eastern (USA and Canada, Eastern Standard Time). This sets the required
information.
7
Set your options for Rings to Answer, and so on.
8
After you finish entering the information, click
Submit
.
Changing optional settings such as setting up a fax transmission log, creating permanent fax destinations, and enabling the
fax server function can be changed through your browser or the MFP control panel.
Note:
If your region supports caller ID, you may have to change the default setting. There are two settings
available; FSK (pattern 1) and DTMF (pattern 2). Contact your telecommunications company or
switch the settings if the MFP does not identify incoming calls.